The heart of tech is coming to the heart of the Mediterranean. Join TNW in València this March 🇪🇸

This article was published on March 13, 2014

Did you know Mac OS X helps you optimize your home Wi-Fi network? Here’s how it works

Did you know Mac OS X helps you optimize your home Wi-Fi network? Here’s how it works
Boris Veldhuijzen van Zanten
Story by

Boris Veldhuijzen van Zanten

Founder & board member, TNW

Boris is a serial entrepreneur who founded not only TNW, but also V3 Redirect Services (sold), HubHop Wireless Internet Provider (sold), and Boris is a serial entrepreneur who founded not only TNW, but also V3 Redirect Services (sold), HubHop Wireless Internet Provider (sold), and Boris is very active on Twitter as @Boris and Instagram: @Boris.

This weekend I visited my parents. As these things tend to go, they had a list of things that bothered them about their computers. I like helping them and ended up moving my mother’s blog to a new host, and optimizing their Wi-Fi network. However, that last task was frustrating at first because I didn’t really know what tools to use. I Googled around a bit and found some very expensive tools, but I also uncovered a great and useful one hidden away in Mac OS X itself.

In the past it would suffice to look at the AirPort symbol in the menu bar top right. If it would show a full signal (all bars black) it would work, and if it didn’t, it wouldn’t. But it seems that the AirPort symbol now always displays a full signal, even when the signal is bad. Fortunately, there is an easy way to check signal-strength, and it is just a few clicks away.

Wifi Menu

Step 1: Press the ‘alt’ key on your keyboard and mouse-click on the AirPort icon in the menu bar, like this:

The network you have selected will display some extra info. This is what each option means:

PHY Mode: protocol being used to connect.

BSSID: The unique identifier for your airport hardware, also known as the MAC address.

Channel: Wi-Fi signals are transmitting on certain channels. A channel might conflict with other transmitters.

Security: The kind of encryption used. WPA and WPA2 are safe options. WEP isn’t anymore.

RSSI: The ‘Received Signal Strength Indication’ shows the strength of your signal. Closer to 0 is better.

Transmit Rate: The actual speed at which data is being transmitted between your access point and your computer.

MCS Index: This is a number that corresponds to protocols used to encode the radio signal.

This is already useful. Especially the RSSI and Transmit Rate, which give you an indication of how well your network is performing. But we don’t stop here.

Utilities option - Window menuStep 2: At the bottom of that menu is an option called ‘Wireless Diagnostics’. Select it to open an app with the same name, after you’ve authenticated yourself. It opens with an introduction screen which we will ignore for now. Instead, we will press the command key + 2. Or go to the ‘Window’ menu and select the ‘Utilities’ option, as shown on the right here.

A window will open with more info about your AirPort network. In the menu bar of that window are 5 options. Select the 5th one called ‘Performance’.

That is what we are looking at now:

AirPort network - Performance

This is the window that will really help you optimize things. Move your computer around the house to see the different parameters change. You could just focus on the ‘Quality’ indicator and wait until it says ‘Excellent’ or keep an eye on the ‘RSSI’ versus ‘Noise’ indicators.

Useful tip? You might also like “How to protect your computer and data in case disaster strikes” from the same author.

I ended up disconnecting the wireless phone system and moving it around to minimize noise and I rotated the AirPort base station 180 degrees, which turned my parents signal from ‘Good’ to ‘Excellent’.

At home I experimented with an old metal tray placed behind my AirPort directing the signal inwards instead of outwards towards the neighbors. There might be other computers, old Wi-Fi networks or microwaves interfering with your network. Try different things and keep a close eye on your network performance, and let us know how much you improved your signal.

P.S.: as mentioned in the comments: “The menu option only shows up in Mac OS X 10.8.x Mountain Lion and 10.9.x Mavericks. If you are still running Mac OS X 10.7.x Lion, the option will not be there but the application does still exist on your system. Just go the the following directory, /System/Library/CoreServices/ and look for the application named Wi-Fi Diagnostics.”